Posted by
royal-chem on Friday, April 10, 2009 3:00:00 PM
Ever wanted to try fuse applied?
It's one of the hottest techniques being used by quilters. It's an
easy, almost instant way to create fabulous designs for everything from
quick crafts to art quilts.
Essentially,
you iron a fusible web onto the back of fabric - sort of like melting a
very thin sheet of glue. This fuses the fabric fibers into a stable
sheet that can be cut out into any shape without it fraying. The shape
is then ironed down onto fabric to make your design. There are several
brands of lightweight fusible web such as Wonder Under or Misty-Fuse
(www.mistyfuse.com) which is the most light-weight fusible available. I recommend using a Teflon sheet to keep the fuse from web gunking up your iron. You can also use parchment paper. Here's how to do it:
# Cut fabric a little larger than the actual size of the finished shape you want.
# Teflon Fold sheet in half on the ironing board. Open Teflon sheet and lay the piece of the fabric wrong side up on one half of the sheet.
# Cut a piece of fusible web the same size as the fabric and lay it on the wrong side of the fabric.
# Fold over the Teflon sheet so that the fabric is sandwiched between two layers of Teflon sheet.
# Teflon Iron the sheet for about 4 seconds with a hot, dry iron and let cool for a few seconds.
# Open pressing sheet and peel off the fused fabric. The fusible web is now melted into the fabric.
# Wipe
the sheet clean with a small wad of fabric to remove every trace of
melted fusible web on the left sheet. This is important - you want to
keep the sheet clean.
# Draw the desired shape
on the reverse side of the fabric or cut free hand with a sharp
scissors. Make sure that there are no little "fringes" of fuse showing
around the edge as these will stick to your iron. A product such as '
Hot Iron cleaner' is useful to clean off any bits of fuse that you
inevitably get onto iron.
Your
shape is now ready to iron down into place. If your design is applied
fuse used on a quilt that will be washed, finish off the edges with
machine stitches. If it's for a wall hanging that will not be washed,
the edges of your fusible applied shapes can be left with out stitches.
NOTE: To preserve the life of your Teflon sheet, avoid ironing on the fold. Repeated folding with a sharp crease will cause the fiberglass to snap. Store it flat or rolled.